Rhododendron, Oregon

Never knew. Never cared. Today i paid more attention to this https://en.wikipedia.org/wiki/Rhododendron#Toxicology

Here in Portland there are maybe 1 plant for 10 people. "It is the national flower of Nepal."

Hm. Surrounded by coincidences. Today i realized that in every place i lived i had one next to door and/or window. Don't know if it's toxic only by smelling it. Probably in combination with something else, like some building materials, cigarette smoke or exhaust. Maybe just as cover, the main amount coming from somewhere else.


Here is 1122 SW Stephenson, my first address in Portland where i was living at Mladin's house. Here i met Mladin's daughter, a girl that looked like Malin from Ace of Base. I was living in a small room at ground level next to the furnace, under the balcony. 4 months at this address September-December 1995.


At Fox Pointe in Vancouver, 3015 NE 57th as remember from documents. But i don't believe i've been staying next to the laundry room... Anyways, the only rhododendron i could see here was in front of 3017, on the right in the picture. But it's also been 20 years since... The apartment seems very small but actually was bigger than the one i live in right now.


6810 SW Hall Blvd @16, Beaverton. Sussex Village. 14 years at this address. The upper right window is the kitchen. The same 600 sqft living space as before in Vancouver and after in Lake Oswego.






47 Eagle Crest Lake Oswego. Balcony in the upper middle-right of the picture. 2nd level. Here since February 2010.


I've been there the other day and moved the rock (fresh ground upper right corner). There it was smelling like in a restaurant with don't know a dozen people smelling simultaneously additive free cigarettes).

Electricity in Ancient Egypt

Pyramids are not only mounds of limestone or primitive concrete in slightly irregularly shaped blocks arranged by some strange but precise geometry. I mean they are for the most part. Inside there are complicated, outworldish structures that only a few on this planet understand.

All the drawings inside the pyramids (ideograms) are made to look at first sight as highly stylized and refined shapes and symbols representing everyday and mythical objects. I think they where drawn this way to mislead and be ignored by the unaware and the primitive. In fact they can be interpreted by every person's level of education and become apparent contradictory for those who can with higher education who can also emulate a lower level understanding (intuition) of the world.

They most likely contain instructions for designing of devices from a civilization that was in ways more advanced than ours, probably thousands of years more advanced, probably in a slightly different direction, most likely unsustainable.

Maybe localized or isolated here on Earth alien sophisticated and hostile ancient civilizations went in conflict. Could this be in conjunctions with other stories like Mahabharata. Or maybe they did something wrong and created Sahara or climate changes and had to move further north. Or maybe because of this http://georgesblogforfriends.blogspot.com/2015/01/great-pyramid-and-earth-precession.html

There are also strange coincidences in choosing the location of pyramids. One of their functions was and maybe still is interacting with the ionosphere. But this wouldn't have worked in a rainy area, because there would have been much fluctuations in interacting with ionosphere during rain. Also rain would have destroyed the outer limestone to a much greater extent. The location took advantage though of the rains further south. Coming on Nile, a body of water with predictable flooding, an ideal source of food. I mean, all you had to do was seed and rip. Also, Pyramids are located in the geometrical centre of the Earth. Could Nile itself had been changed course for the purpose? Etc.
http://en.wikipedia.org/wiki/Geographical_centre_of_Earth

And now let's take a look at some of the drawings.

There is little doubt to me that the four disks on a djed collumn represent high voltage insulators. But there could be more to it. Maybe entirely, if raised to full scale, they could be generators or receivers or resonators of wireless electricity from a distance source, that might have been (one of the functions of) the Great Pyramid.

The number of disks could tell an electrical engineer the voltage we are dealing with. Most likely AC but i'm thinking now...

For a century or so we all still digest Tesla's inventions. What if there's more to "basic electric devices" that he invented (generators, motors, transformers and coils)? (not thinking of the gadgets we use today). Devices deriving from higher science, all based on shapes and materials?

We all know they were writing with ideograms.
http://www.citrinitas.com/history_of_viscom/ideograms.html

In this type of writing or communicating visually ideograms or hieroglyphs represent abstract symbols. By the drawing of the djed we may realize that at least in part it was dealing with high voltage.

Starting with this, through extrapolation we can hypothesize this is a representation of a CRT... Or other type of high voltage tube.

http://www.thunderbolts.info/forum/phpBB3/viewtopic.php?f=10&t=14651
I found many representations like this, but slightly different. In some, the serpents may represent sweeping electron rays in CRTs. Those with the head of snake inward maybe be for cameras and outwards for TV sets.

But they could be several valid interpretation of the same ideogram. Those devices could represent anti-gravity or impulse drives. Narrow beams of gases accelerated in the middle of a vacuum filled tube to relativistic speeds and returning at the lower speeds could generate a difference in momentum.

Here we might have a light bulb in top of a djed that might act as a wireless receiver or even some type of unknown generator or resonator that extracts electricity from some unknown or distant source (Pyramid maybe). But the 23 degrees angle of the djed and the shape of the top may also represent Earth and its magnetic field.

Here is Tesla with a wireless bulb in his hand. High voltage, high frequency. (Why is Tesla represented always in a Vulcan mind meld session with self, or maybe it was trendy back then).

Heating? Don't know how the weather is in Egypt year round. But what about the walking anthropomorphic figures on the sides? Could this represent periodic migrations due to ice ages? Different populations separated for thousands of years surviving then coming in conflict? Or an illustration of the fact that moving heat like in heat pumps is more efficient then producing with resistors?

And last but not least. Are these light sabers from the Star Wars movies inspired by the djed? Just think of... jedi...

sa=X&ved=0ahUKEwjF-cOg5NnRAhVH_mMKHRfKDNUQ_AUICCgB&biw=1172&bih=622

http://en.wikipedia.org/wiki/Electrojet
"There are two electrojets". No there are four. LOL

Mysteries of the Attic, Revealed II

Ok. This has gotten pretty complicated so i'm going to try to summarize. About one year after i moved here, intrigued by smell, dust, sound of belts of cars starting, i popped the attic lid that was made of drywall with popcorn on it. One corner was cracked. Too bad back then i didn't take pictures of everything.

None of the three pipes from all levels did have an individual passage through the roof. Mine was laying on the floor like this blowing insulation and smell above the kitchen window and in the parking lot and the other two were hanging near an airing vent, partially evacuating the smell in the attic.

First i replaced the lid with i guess 3/4 inch white laminated fiberboard to which i attached two hooks. Later i added an alarm to it (and it was effective, for a while).

I put all three bathroom exhaust together with a fan on top near a vent and enclosed it. I made an enclosure too for the 6" kitchen exhaust. After many trials it all started looking like this:



All three pipes in the first of two picture above have dampers at the end near the vent. There is one more damper preventing backlow in the attic.

Today they look different. I attached some pieces of rubber pipes in the end for attenuating vibrations.

After the neighbors downstairs let their exhaust fans running for years and creating all sort of problems, i moved my pipe near my kitchen exahust with some dampers preventing backflow both in the attic and in the bathroom exhaust. The kitchen 6" exhaust pipe does not have a damper at the end but has one near the lower end on top of the present mold evacuation system (not seen in last picture). The polystiren foam adapter for that damper broke and i replaced it Monday with a plywood ring.

Today i moved back my exhaust pipe near the other two since currently the bathroom fan downstairs is running less than an hour a day like it's supposed to. This way there can be no suspicion that i'm using it to pump stuff back in the kitchen exhaust and into the floor but there will be that i'm using to pump air back in the other two bathroom exhaust but there are two dampers on each of those, one installed by me at the upper end as seen in the pictures and one near each fan. (All three pipes are fitted and connected symmetrical with dampers and everything). But to me there is no doubt to me they will adapt and will come with more insinuating actions like last night leaving the window cracked. Cause they are http://georgesblogforfriends.blogspot.com/2012/01/kaiser-khazaria-and-lenin.html Now, featuring ninja.

The two 1.5 pipes hanging near the attic damper where the fan pulls air from the attic insuring the airing at all times are connecting to the two exhaust pipes' housing from the lower levels, as some of the pipes are leaking. Airing those housings, through thermal flow only.

The fan in the picture below is now above my stove in the place normally used for the kitchen exhaust, that is the lower end of the 6" pipe seen in the pictures above and turns counterclockwise as most BLCD (BrushLess DC) computer (not laptop) fans do http://en.wikipedia.org/wiki/Brushless_DC_electric_motor . (BLCD is an improper name, they are actually AC motors with a built in inverter). It is part of the system that pulls with two 1.5" flexible hoses air from the floor, behind the fridge, where there's been a leak and near the bathroom. Initially built last November for eliminating mold from floor after a leak, i keep it running now for eliminating smoke (probably cigarette) that for some reason is present in floor and kitchen wall common with the next entrance) near the fridge.

Computer fans can't turn the other way because they are actually synchronous AC motors with a built in invertor (improperly named BLCDs). By inverting the polarity of the power supply they simply won't start.

ttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor#mediaviewer/File:Poles.jpg

One more thing before i forget. I might be wrong, but there is one passage visible from the parking lot, a chmney like 3 or 4 inch thick structure somewhere above the kitchen that doesn't seem to have a correspondent in the attic.

This is the last configuration as of 03/04/2015 10 AM

03/05/2015 @7 PM

04/06/2015 I discovered this: Just above the kitchen, the exhaust 6" pipe sits next to the hot water pipe that goes left to the kitchen and right to the bathroom. The tape was all dried and not sealing anymore. Parts of it came easily. The remaining one was put by me more recently, however that is not a good job either, is very hard to work, you have to kinda sit on your knees beacause the roof is too close. So i poured two cans of Great Stuff Fire Block that actually does not extend as much as the cheaper foam. It covered almost to the last fold of the pipe. I'm gone keep an eye on to see if the foam does not bend a pipe or cracks a solder joint or something but i don't think it's possible in open space.

The whole pipe was covered with an insulation blanket; every time i was using the exhaust stuff was getting in it. This spring when it got hot the first time it was stinking really bad, i went in the attic and removed the blanket from the top of the pipe. But there is one more thing. During the night time the pipe was cooling (in the morning i have to leave the water to run like one whole minute). Since everything was covered with an insulating blanket, i assume the whole pipe was heating and cooling loosing heat but also dilating and contracting, with the folds opening and closing. Quite a piece of engineering. Also cannot understand why they didn't use that T at the right the other way and save an elbow. Just to make the hot water pipe run under the elbow of the exhaust?