If Earth's crust was made of tectonic plates the size of continents floating on top of liquid magma and bumping each other in "fault" areas, the earthquake, especially the horizontal component would propagate much further, if not in the whole plate.
Google AI agent Gemini 4 agrees there is statistic data showing correlation between the tides that cause enormous pressure changes, enormous force of atmospheric pressure on large seismic areas and earthquakes. But from what i saw from my sporadic, occasional cases analysis so far they occur both at max high and max low tides. Some of statistics are good for certain areas only.
But if serious studies are to be done with the help of AI on vast mounts of past data, i am sure they could find pretty solid area specific prediction mechanisms.
12: 44 According to tectonic plates theory, at the meeting areas of two plates (faults) mountains raise as the plates push towards each other. But if the plates are solid, how can they bend upwards, behaving like plastic?
So here we are, praying and waiting for a Big One.
Of course plastic crust cannot explain earthquakes as bumping solid plates. But they are not produced like that. They are produced by sudden changes of phase with sudden changing of volumes within pockets of liquid magma where two convection currents meet or separate. Pressure from changing volumes due to phase change can be some of the greatest forces in the known universe.


It happens a lot in the permafrost in the tundra, probably the reason it is called like that. Large areas that are near freezing suddenly start to freeze but from one point which then propagates for km, making a thunderous sound.
All of these occurrences are not "normal" breakdown or component failures, they were all done intentionally.
So i will try to re-write that.
Dog food in the fan compartment. It could only have been poured there intentionally.
Bent right half shaft (i cannot imagine how). Almost impossible. It's been 5 years and 110k since i replaced those and still have no problems.
Damaged mating surface at the oil filter. Like someone put once a filter there with no gasket. It created a permanent leak, no matter how much i tight the filter. The oil gets sprayed onto the exhaust and makes it stink, prompting others to drive in front of me with old cars and make me breath exhaust. Oldest picture i got with the damaged surface is since 2022.
Coolant leak. I discovered it about year ago by one of the hoses at the transmission coolant. I added an extra clamp (with thread) but it needs constant re-tightening. I ordered a new OEM hose with the original spring clamps but it requires flushing of the coolant. It of course made us breath ethylene glycol in the cabin. Xenu story.
Exhaust leak by the cover gasket that has been modified intentionally to remove one of the little composite cylinders (second) by the spark plug wells. That is part of the whole cover made by injection with composite in a mold in an injection machine and could hot have come like that from the factory. Was clean cut (machined).
Exhaust leak by the first oxygen sensor, closer to the firewall. I discovered it recently. The sensor was completely loose, could take it out by hand. Both translate by breathing exhaust in the cabin. Gassing.
























